The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 that you referenced is designed for use on pick-up trucks to carry a kayak over the truck bed, but could work well to carry your kayak on your Yamaha Rhino UTV with 2 inch hitch receiver. We will want to take a quick measurement to determine the compatibility of the load extender with your UTV.
The hitch-mounted extension is adjustable vertically from 42 inches to 64 inches above the top of the hitch opening. If... view full answer...
I have a solution for you, but we do not have a bench seat cover for a UTV/ATV that is a single piece that covers both parts of the seat because a majority of the seats on these vehicles are either captains chairs or 2 piece bench seats. I recommend using something like the Canine Covers # DE1020BK which is designed for the back seats of cars/trucks, but will act as a one piece cover for your UTV/ATV and provide great protection for your bench seat.
This cover is 60" wide x 19" deep x... view full answer...
I spoke with my contact at Classic Accessories and she stated that the All-Weather UTV Cab Enclosure, # CA18020, will fit all current models of the Kawasaki Teryx, including your 2008. I have included a link to the installation details for you. view full answer...
The Classic Accessories All-Weather UTV Cab Enclosure # CA18020 will only fit your 2008 Kawasaki Teryx 750 if you remove the roof. There isn't a similar option that will work with your Kawasaki that will allow you to retain the roof. view full answer...
That's a good question and we have had a number of people wanting to do the same thing, but e-track does need to be mounted parallel to your UTV, in the direction of travel. Wheel straps pulling to the side, opposite the direction of travel, can put undue stress on the straps with what is essentially a moving load.
So what you will want is horizontal e-track with wheel straps:
- Erickson Horizontal E-Track - 4 Feet # EM19147 or 5 Feet # E19148
- Erickson E-Track Wheel Tie-Down Strap... view full answer...
We went out to the warehouse and measured the Classic Accessories Quick-Fit UTV Bench Seat Cover for the Kawasaki Mule 4000/4010, item # CA18033. The bench cover measures 41-1/2 inches x17 inches seam to seam for the top part of the bench. The back cover measures 44-1/2 inches x 10 inches seam to seam.
I have posted a photo showing the measurements I took. You would need to compare the dimensions to your Mule to see if it would fit or not. view full answer...
My contact at Airaid checked the air filters specified for your 2007 Honda TRX680 4-Wheeler and based on his research a better filter option for your ATV is their # AR700-493. This filter has a 3-inch flange to mate with your intake, a base diameter of 6-inches, a top diameter of 4-5/8-inches and a height of 6-inches. If these dimensions match your current filter then this one should be a good fit.
Since these filters are NOT vehicle-specific you'll need to check the measurements of your... view full answer...
I think the adaption can be made for the CIPA UTV Adjustable Side Mirror - Black - Left Hand, # CMM37 and the right hand # CMM38 to fit your 1 inch bars, but that would take some shimming. The 1-3/4 inch round clamp would need a shim that will grip as well as allow pressure for a tight fit.
Another option would be to use the CIPA Handlebar Grip Mount ATV Mirror, # CM-11126 on the top front rail to adjust for that side view mirror adjustment. view full answer...
If the roll cage on the back of your 2012 Yamaha Rhino 700 is exposed and has the OEM top the # CA78637 would fit it and work fine. Some of the pictures I pulled up of your UTV had large hard tops that went all over the roll cage and others that just sat on the top of it. If yours is just the top this cover would work well. view full answer...
We do carry an enclosure for a Kawasaki Teryx. Take a look at the Classic Accessories All-Weather UTV Cab Enclosure, # CA18020. This will give you a windshield, back window, and doors. It does fit over the factory roof. I have included a link to the installation details for you. view full answer...
I attached install instructions for the Classic Accessories part # CA78637 which is a back window for your Yamaha Rhino.
It's pretty easy. Basically you just attach the top straps first and then work your way down making sure it's centered. view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
If you didn't want to drill down into the frame of your trailer you could use short wood screws to attach to just the plywood floor. I would recommend using a screw in every hole though for the # EM19147. view full answer...
I went out to the warehouse and measured the the Classic Accessories Quick-Fit UTV Bench Seat Cover for the Kawasaki Mule 4000/4010, item # CA18033. The bench cover measures 41-1/2 inches x17 inches seam to seam for the top part of the bench. The back cover measures 44-1/2 inches x 10 inches seam to seam. This cover should be the correct fit for your 3010 mule with bench seat.
I have posted a photo showing the measurements I took. view full answer...
The Performance Tool # PTW2997 charger would work for topping off and trickle charging, but is not really designed to charge a fully drained battery.
A better option for what you would be doing would be the Go Power Portable Solar system # 34282610. This is a fully portable 200 watt system and would be perfect for your needs. With it weighing over 50 pounds though, it can be a little cumbersome. I included a link to a review of this for you to check out.
For a more permanent option, the... view full answer...
Hello Paul, that is a really good question. I just chatted with the folks at Mad Ramps, and they said they really cannot advise using the # MR54FR ramps for loading motorized wheelchairs into the back of a 2015 Ford Transit T-150 Van. The main concern is that the ramps would be too far apart to accommodate the wheelchairs wheelbase. The ramps cannot be moved closer together or further apart and they are designed to accommodate the standard ATV/UTV/Golf Cart wheelbases. That and if you were... view full answer...
So long as you have the needed clearance, you can go from a size 18x8.50-8 tire and wheel to a 12 inch wheel; the general rule of thumb is you want at least 3" of clearance from the top of the tire to your fender (if your golf cart has one) and at least 1" of clearance between the inside of the tire and your frame rail.
A 18x8.50-8 tire and wheel measures 8.5" wide and 17.8" in diameter, so you'll want to keep that in mind. We do have 12 inch wheels and tires with a 5 on 4-1/2" bolt pattern,... view full answer...
I would go with the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor, and Heat Strip - 15,000 Btu # ACM150CH. You will need to make sure your trailer roof is capable of holding this unit(94 pounds) and the people who will be installing it.
In the area it will be installed it will need a roof thickness of at least 2-1/2 inches to mount and a 14x14 inch hole. You will see in the videos attached how to accomplish this.
It has a heat strip that can put out 5,500 BTUs... view full answer...
Go To Results